Today, I discovered that the New Balance NX990 GPS Cardio Trainer Watch, like the Pyle PSWGP405BK, is just another Latitude Limited Nav Master II clone. Following my hunch, I searched for the NX990’s accompanying software, and lo and behold, it’s just rebranded version of GPS Master! Best of all, it’s an updated version, v126.96.36.199, vs the older v1.2 version that I got from Pyle. Besides the red background, it has a much improved interface, showing a google map of your track, and a zoomable graph with user selectable data that tracks your stats live on the map.
So for instance, you can select the point on the graph where your heart rate is highest, and see where you were located on the map.
Best of all is the new Data Transfer->AGPS menu item. A-GPS (Assisted GPS) lets you use the Internet to download GPS satellite almanac data. Your GPS watch can download the almanac data directly via the satellites, but it is a very slow procedure. By connecting your watch to GPS Master once a week and downloading new AGPS data, you can get a hot GPS fix a lot faster. I wasn’t sure if my Pyle firmware had A-GPS support built in, so I took a risk, and used Setting->Watch firmware update to update my Pyle watch to the latest New Balance firmware. I’m happy so say that my watch did not get bricked! [DISCLAIMER: YMMV. I AM NOT RESPONSIBLE IF YOU DECIDE TO INSTALL THE NEW BALANCE FIRMWARE ON YOUR WATCH, AND IT TURNS INTO A PAPERWEIGHT] The New Balance v1.20 firmware appears to have all of the functions of my Pyle firmware. The most obvious difference is just that the screen fonts are more squared off looking. Some of the menus look slightly different, too. I took my watch outside after updating the AGPS data, and it got a GPS fix basically instantly!!
Another great discovery is that unlike my GPS Master 1.2, NB 990 GPS’s exported GPX track files now contain heart rate data! This means when upload your GPX track files to web sites such as RunKeeper, your heart rate data will be saved and displayed, as well. Meaning that you don’t have to use the csv2gpx/csv2tcx utilities that I wrote yesterday in order get your HRM data into other platforms.
All and all, I am very happy with both the software and firmware updates. I took my watch and HRM out for a workout today, and they worked flawlessly with the new firmware.
NX990 GPS Master PC Software
NX990 GPS Master User Manual
NX990 User Manual
Here are some open source goodies for the watch:
Crane GPS Watch Client : command line utility. Most notably, it exports TCX files, which is important if you like to use the watch with the GPS turned off, since GPX files that contain HRM data w/o GPS data aren’t valid.
kalenji-gps-watch-reader : exports a multitude of formats, including Garmin FIT. Also performs elevation corrections via Google Elevation API.
16 thoughts on “Pyle PSWGP405BK GPS Watch Software and Firmware Updates”
Thanks for sharing. I use my Nav Master clone for running and walking.
Th NB SW v2.0 is really better than the v1.2 GPS Master.
Thanks for the info here! I have the Karrimor version of the watch and NB version also runs fine, sadly recently seem to be getting a lot of script errors when using it (presumably Google’s APIs). Not sure if there is another version floating about but haven’t come across a fix as yet 🙁
Me too in the script errors. Unfortunately, nothing we can do. AFAIK, there are no new products in active development
Those script errors are really annoying.
The errors only show when you move your mouse over the actual map, so atm I make my routes in an other program or on an other website and then import it into NB/GPS Master as an kml file.
This works great.
The versioning of the NB program is a bit strange.
The copyright notice in the aboutbox reads 2009-2012, while the aboutbox of my GPS Master program v188.8.131.528 reads 2009-2013.
See my post below to fix script errors.
Just wanted to say thank you for this post. I have the Crane GPS watch and the v184.108.40.2068 GPS master software. A couple of months ago, A-GPS updating ceased working and I was quite disappointed. Using the NB v2.0.16 software seems to have solved things.
Cheers for that!
I have bought a new laptop and I have lost the software. Can anyone please send me the software please????
Just click on the link in the article above to download the software
thanks a lot for all this work. I have a Aldi Crane watchand A-GPS update does not work anymore. Can oneof you post or send me the NX990 GPS Master PC Software whose link is broken? thx
I am now locally mirroring the files. Just click the links above. I’ve updated them.
software has been updated to 2.0.21
I can be found at bottom of page under software download
site is in Dutch but this works with NB990 gps watch
Where can I download the NB SW v2.0 ??
It’s in the NX990 PC Software link above
Thanks for this info. Used to get my ALDI Ski watch (old stock bargain) going. You may find that the maps don’t work properly. Copy and paste the text below into notepad, save with the .reg extension, and double click the result to fix that issue.
Windows Registry Editor Version 5.00
“NB 900 GPS.exe”=dword:00412af9
Yeah — I just purchased a NX990 GPS Trainer and went to download the software at nbmonitors.com but the site is down so this was a lifesaver. BTW, does anybody know how to fix the poor contrast on the display? Trying to adjust via the contrast settings did not improve it markedly